Advertisement
Correcting Red Eye
You can reduce red eye in images.
1
At the screen used to select prints (refer to pp. 9, 15, 22, "Selecting the
Number of Copies to Print" in the User's Guide), touch the image that you
want to correct.
2
Touch the [Edit picture] button.
This image editing screen is displayed.
3
Touch the [Remove Redeye] button.
The red eye correction screen is displayed along with the red eye
correction area (green frame) in the center of the screen.
4
Touch the [Move] arrow buttons to move the green frame and place it over
the pupil of the eye affected by red eye.
Correction area (green frame)
View inside the green frame
5
Under [Zoom], touch the [+] button.
• Touch the [+] button repeatedly until only the red color of the pupil is
enclosed by the green frame.
• If any part of the red in the pupil is outside the green frame, touch the [–]
button to zoom out or touch the [Move] button arrow to adjust the green
frame position.
6
Touch the [Remove Redeye] button.
The red eye is corrected.
To cancel the correction, touch the [Reset] button.
Note
With some images, full correction may not be possible.
7
When you are done, touch the [Apply] button.
The display returns to the screen at Step 3.
8
Touch the [Apply] button.
The display returns to the screen at Step 1. You can continue by editing
another image or returning to the output operation.
4
Advertisement
