Reducing The Red-Eye Phenomenon - Sony DPP-FP50 Fall 2005 Operating Instructions Manual

4
Press ENTER.
The filter takes effect.
Reducing the red-eye
phenomenon
You can reduce the red-eye phenomenon
of a subject shot using a flash.
Note
If you perform editions such as enlarging,
reducing the size of, rotating or moving an
image after the red-eye reduction
adjustment, the red-eye reduction may not
take effect. Perform the red-eye reduction
after these editorial operations.
1
Display the Edit menu (page 31).
2
Press g/G/f/F to select
eye reduction) and then press
ENTER.
The adjustment frame appears on the
image, which indicates the range for
red-eye reduction adjustment.
Adjustment frame
3
Adjust the position and size of the
adjustment frame.
Make the red-eye reduction
adjustment for the right and left eyes
separately.
GB
34
To move the adjustment frame
1 Press g/G/f/F to select
2 Move the frame with g/G/f/F.
3 Press ENTER.
To adjust the size of the adjustment
frame
Press g/G/f/F to select
(Enlarge) or
ENTER.
Each time you press ENTER, the
frame becomes larger or smaller.
Tip
(Red-
Make the size of the adjustment frame two
to seven times as large as the eye size.
4
Press g/G/f/F to select "Execute"
and press ENTER.
The range of red-eye reduction
adjustment is enlarged.
5
Press ENTER to execute the red-
eye reduction adjustment.
The adjustment takes place.
To reset the adjustment
Press CANCEL in step 5. The red-eye
reduction is canceled and the window of
step 2 is displayed.
(Position) and press ENTER.
The frame moves in the selected
direction.
The frame is fixed in the current
position.
(Reduce) and press