Graco GrindLazer Pro RC813 G Operation, Repair, And Parts page 15

Menu Screen #5 - Error Codes
Displays the most recent error code and the total num-
ber of times that error has occured. Cycle through previ-
ous error codes using Up/Down Buttons.
3A5581C
Error Codes
E04: High Voltage
E05: High Motor Current
E08: Low Voltage
E09: Hall Sensor Error
E12: High Current (short circuit)
E31: Home Button Error
E32: Zero Button Error
E33: Cut Depth Button Error
E34: Up Button Error
E35: Down Button Error
To clear an error code that appears while on the Run
Screen:
1. Turn DCS Power Switch OFF.
2. Address/Fix the issue.
3. Turn DCS Power Switch ON.
NOTE: See Repair Manual for more information on
Error Codes and Troubleshooting.
Setup
15