Graco GrindLazer Pro RC813 G Operation, Repair, And Parts page 13

Cut Depth Button
Quick Press: Takes the cutter head to the Cut Depth Tar-
get.
Long Press:
- If at or above zero point: Opens new screen to
select desired cut depth using up/down buttons.
•To exit without saving, quick press the Cut Depth
Button.
•To exit with saving, long press the Cut Depth But-
ton.
- If below zero point: Reprograms the Cut Depth Tar-
get to the current cutter head position.
3A5581C
Up Arrow Button*
Quick Press: Raises the cutter head by 0.01" (0.25mm,
10 mil).
Long Press: Raises the cutter head to Home position.
Down Arrow Button*
Quick Press: Lowers the cutter head by 0.01" (25mm, 10
mil).
Long Press: Lowers the cutter head to Cut Depth Target.
*Handlebar Rocker Switch has the same functions as Up
and Down Arrow Buttons.
Setup
13