Dcs Control (Dcs Models Only) - Graco GrindLazer Pro RC813 G Operation, Repair, And Parts

Setup

DCS Control (DCS Models only)

Buttons on the DCS Control have two functions, quick
press and long press. Quick press refers to pressing the
button and releasing the button quickly, while long press
is pressing the button and holding the button for two or
more seconds.
NOTE: "+" (plus) refers to above pavement surface. "-"
(minus) refers to below pavement surface.
Run Screen
Home Button
Quick Press: Takes the cutter head to its highest
position.
Long Press: Brings up Menu Screen.
12
Zero Button
Quick Press: Takes the cutter head to the surface.
Long Press: Reprograms the zero point to the current
cutter head position.
3A5581C