To Edit Touchscreen Settings - Carrier Equipment Touch Installation And Setup Manual

To edit touchscreen settings

1
On the System View screen, touch Setup > Touchscreen Setup.
2
Touch a button to jump to one of the following screens:
Screen
About
Inactivity Timeout
Sensor Setup
Clean Screen
Key Click Off/On
Alarm Sound Off/On
Reload Firmware
Equipment Touch
Installation and Setup Guide
Description
Displays information about the touchscreen firmware.
Lets you define how long the Equipment Touch can have no activity before
returning to the Standby screen and logging out the user. Set to 0 to deactivate
this feature.
Lets you set up the Equipment Touch's temperature and humidity sensors. See
Using Equipment Touch's temperature and humidity sensors to control equipment
(page 19).
Displays a one-minute countdown timer so that you can clean fingerprints from the
display window without touching something that would affect equipment operation.
Touch Key Click Off to turn off the sound when you touch a field or button. Touch
Key Click On to turn on the sound.
Touch Alarm Sound Off to turn off the alarm notification sound or touch Alarm
Sound On to turn on the sound. An alarm will generate a sound only if it is set up in
ViewBuilder to do so.
Erases the current firmware so that you can load new firmware through the USB
port. See To update the Equipment Touch's firmware (page 23).
21
To edit touchscreen settings
CARRIER CORPORATION ©2019
All rights reserved