To Set Up Scheduling Functionality - Carrier Equipment Touch Installation And Setup Manual

To set up scheduling functionality

To set up scheduling functionality
You can define BACnet schedules for each time clock microblock in the controller's control program(s).
To allow a user to create schedules on the Equipment Touch:
1
In the i-Vu® or Field Assistant tree, right-click the controller, and then select Driver Properties.
2
On the Settings tab, scroll down to TouchScreen Control and verify that TouchScreen Schedule Edit Enable is
checked.
CAUTION If scheduling will be done in the i-Vu® interface, you should disable scheduling in the Equipment
Touch so that they do not overwrite each other's schedules. To disable scheduling, uncheck TouchScreen
Schedule Edit Enable.
Equipment Touch
Installation and Setup Guide
18
CARRIER CORPORATION ©2019
All rights reserved