Download Print this page

Safety Instructions; General Instructions; Recognize Safety Information; Understand Signal Words - Dometic A&E Systems 828 Series Replacement Instructions Manual

Advertisement

SAFETY INSTRUCTIONS

This manual has safety information and instruc-
tions to help users eliminate or reduce the risk of
accidents and injuries.

RECOGNIZE SAFETY INFORMATION

!
This is the safety-alert symbol. When you see this
symbol in this manual, be alert to the potential for
personal injury.
Follow recommended precautions and safe op-
erating instructions.

UNDERSTAND SIGNAL WORDS

A signal word , WARNING OR CAUTION is used
with the safety-alert symbol. They give the level of
risk for potential injury.
!
WARNING
Indicates a potentially hazard-
ous situation which, if not avoided, could result in
death or serious injury.
!
CAUTION
Indicates a potentially hazard-
ous situation which, if not avoided may result in
minor or moderate injury.
CAUTION
When used without the safety
alert symbol indicates, a potentially hazardous situ-
ation which, if not avoided may result in property
damage.
Read and follow all safety information and instruc-
tions.
These instructions must be read and under-
stood before installation of this kit. This kit
must be installed by a Dometic Service Cen-
ter or a qualified service technician. Modifica-
tion of this product can be extremely hazard-
ous and could result in personal injury or
property damage.
The Fabric Roller Tube Assembly (FRTA) consists
of a fabric, a roller tube and torsion assemblies.
For proper awning operation, the roller tube is
under spring tension from the torsion assemblies.
Improper release of this spring tension can
result in damage to the awning, severe per-
sonal injury, or both.

TOOLS AND HARDWARE REQUIRED:

End Cap Guide
Screwdriver
Electric Drill
3/16" Drill Bit
Stepladder
Torsion Winding Tool
1/8" Cardboard or Wood Spacer
3/16" Pop Rivet (308171.006) 4 req.
A. Removal Of Awning From Coach
Note: Awning removal from the coach is NOT necessary
when replacing a torsion assembly. Proceed to Section B,
Steps 1 & 2, Sections C, Steps 1–3, and Section D, Steps
1–3.
2
"More information https://www.caravansplus.com.au"
8300 and Sunchaser Service Instructions

GENERAL INSTRUCTIONS

1. In all instances of fabric or roller tube replacement,
it will be necessary to have a large work area to allow
complete unrolling of the awning. This work area
must be clean and smooth so the fabric will not be
damaged.
Socket Wrench Set
Pliers
Pop Rivet Tool
Roll of Gray Tape
Small File
Steel Pin

Advertisement

loading