Table of Contents
Advertisement
Pretty - Nice - LADy
annEx: aLarm and notiFication
All alarm and notification messages appear on the display, possible causes and solutions.
UK
14
maintenance request for cleaning
problem:
there are 100 operating hours left from the time of the message
appearing before the stove will be blocked for cleaning.
solution:
Arrange for a technician to clean the stove.
sudden power cutout
problem:
the power has been down for more than a minute.
the stove signals the power cutout and shuts down.
alarm: gases not up to heat
problem:
the discharge gases have become too cold; the embers have gone out.
cause:
the pellets in the tank are finished. refill the tank.
alarm: start-up failed
problem:
the stove has not started up.
cause:
the brazier is dirty or not properly in place. No pellets.
the element does not work. coNtAct the techNiciAN.
Vacuometer alarm
problem:
trouble discharging the gases.
cause:
the flue system is obstructed. coNtAct the techNiciAN.
alarm: overheating gas
problem:
the temperature of the discharge gases has exceeded the permitted
threshold.
cause:
the gear motor is operating continuously, the gas probe is broken.
coNtAct the techNiciAN
alarm: stove overheating
problem:
the body of the stove has exceeded the permitted threshold and is
overheating.
solution:
the fan is not cooling down the stove. coNtAct the techNiciAN.
alarm: gas evacuator motor
problem:
the gas evacuator motor is not working or the board cannot detect
its operation.
cause:
the motor is not powered or the tachometer sensor is not responding.
coNtAct the techNiciAN
clock not programmed
problem:
the time and date has not been set.
the timers cannot be used.
solution:
set the time and date and any timers in the
respective menu.
Advertisement
Table of Contents
