Hitachi H 60MEY Service Manual page 7

3. Removal of the motor
(1) Firmly hold the Housing <59> and use a
plastic hammer to tap the shaft of the Rotor
<66> until the spigot joint of the Gear Cover
[128]{118} is removed from the Housing
<59>.
(2) The Rotor <66> has strong magnetic force.
Firmly hold the Housing <59> and pull out the
Gear Cover [128]{118} from the Housing
<59>.
NOTE: When the Gear Cover [128]{118} is
separated from the Rotor <66> and
the Rotor <66> remains in the
Housing <59>, press the Housing
<59> and push the shaft section of
the Rotor <66> to remove the
motor.
• Removal of the motor
Tap the shaft of the Rotor <66>.
-6-
[128]{118}
<59>
<66>