Hitachi H 60MEY Service Manual page 17

CAUTION: Be sure to apply TB1401 screw locking agent to the threads of the following screws and
bolts. Otherwise, the screws or bolts loosened by vibration may cause damage to the
product body.
M8
• Hex. Socket Hd. Bolt (W/Flange) M8 x 35 <25>
for mounting the cylinder case ······················································· 19.6
M6
• Seal Lock Hex. Socket Hd. Bolt M6 x 45 [122]{112}
for mounting the crank case (housing side) ······································· 9.8
• Seal Lock Hex. Socket Hd. Bolt M6 x 22 [126]{116}
for mounting the gear cover (crank case side) ··································· 9.8
M5
• Hex. Socket Hd. Bolt (W/Flange) M5 x 18 <96>
for mounting the crank cover ························································· 7.84
• Seal Lock Hex. Socket Hd. Bolt M5 x 12 <72>
for mounting handles (A) and (B) ···················································· 4.9
• Hex. Socket Hd. Bolt (W/Flange) M5 x 14 <61> and
Hex. Socket Hd. Bolt (W/Flange) M5 x 16 <93>
for mounting the back cover ·························································· 3.92±0.49 N•m (40±5 kgf•cm)
• Hex. Socket Hd. Bolt (W/Flange) M5 x 14 <61>
for mounting the tail cover ····························································· 5.9±1.5 N•m (60±15 kgf•cm)
• Hex. Socket Hd. Bolt (W/Flange) M5 x 12 <18>
for mounting the cylinder case cover ··············································· 3.92±0.49 N•m (40±5 kgf•cm)
• Seal Lock Hex. Socket Hd. Bolt M5 x 30 [115]
for mounting the vibration absorber ················································· 7.84
• Seal Lock Hex. Socket Hd. Bolt M5 x 30 [115]
for mounting the weight ································································ 7.84
• Seal Lock Hex. Socket Hd. Bolt M5 x 16 [120]
for mounting the spring holder ······················································· 7.84
D4
• Tapping Screw (W/Flange) D4 x 16 <89> for mounting the cord clip ······· 1.96±0.49 N•m (20±5 kgf•cm)
• Tapping Screw (W/Flange) D4 x 25 (Black) <85>
for mounting handles (A) and (B) ···················································· 1.96±0.49 N•m (20±5 kgf•cm)
D5
• Hex. Hd. Tapping Screw D5 x 60 <57>
for mounting the stator sensor PCB set ············································ 2.94±0.49 N•m (30±5 kgf•cm)
Tightening torque
-16-
+20
+1.96
N•m (200 kgf•cm)
0 0
+1.96 +20
N•m (100 kgf•cm)
0
0
+10
+1.96
N•m (100 kgf•cm)
0
0
+0.98 +20
N•m (80 kgf•cm)
0
0
+0.98
+10
N•m (50 kgf•cm)
0
0
+1.96 +20
N•m (80 kgf•cm)
0
0
+1.96
+20
N•m (80 kgf•cm)
0
0
+1.96
+20
N•m (80 kgf•cm)
0
0