Hitachi H 60MEY Service Manual page 10

• Mounting the cylinder and retainer sleeve
Avoid the Oil Seal <23>
from being turned up.
Engage the Lock
Sleeve <45> with the
Cylinder Case <24>.
<43>
Engage the Lock Sleeve <45>
with the Clutch <47>.
Engage the Clutch <47>
with the J-390 clutch jig.
Pay attention to the direction of the Retainer Damper
Washer <30> and Damper Washer <36>.
Insert position of the Lock Spring Washer <43>
<10>
<24>
<40> <41>
<47>
<46>
<44>
<45>
J-390 clutch jig (Code No. 370652)
-9-
Position the slider groove upward.
Engage the Clutch <47>
with the Cylinder <39>.
<39>
<50>
<48>
Position the notch downward.
Position the
concave portions
sideways.