Pre-Flight Checklist; Aircraft Operations - MJX R/C Bugs 4W User Manual

Pre-flight Checklist

1. The aircraft, remote controller and mobile device are full charged;
2. The propellers are installed correctly;
3. The arms and propellers are unfolded;
4. Ensure the camera lens are clean;
5. Use only MJX parts or parts certified by MJX. Unauthorized parts or parts not from MJX certified
manufacturers may cause malfunction or safety issues.

Aircraft Operations

Signal connection between the aircraft and remote controller
● Keep pressing the red button "
makes 2 beep sounds, and the indicator light "
signal connection status.
● Power on the aircraft (Pic. 2). The aircraft will make beep sounds with front and rear lights flashing
and will automatically link to the remote controller. Once the remote controller sends out a long beep
sound and the indicator light of the remote controller turns from flashing to solid on and the signal
icon " " is shown on the LCD screen, it means that signal connection is succeeded.
● Signal connection is done once for all if the remote controller is not linked to other
!
aircraft.
● Set the connection one by one to avoid signal connection error.
Aircraft initialization detection
After signal connection, the aircraft enters into initialization detection procedure with front and rear
lights flashing red, green and yellow alternatively. Make sure that the aircraft is set on a flat and still
surface for the initialization detection. The aircraft initialization detection takes about 8 seconds. Once
the remote controller sends out "Di Di" sounds and the aircraft front and rear lights flash yellow
alternatively, initialization detection is completed.
" and turn on the remote controller (Pic. 1). The remote controller
Pic. 1
" keeps flashing; the remote controller is under
Pic. 2
-23-
Bugs 4W User Manual