Install Mobile Phone Holder - MJX R/C Bugs 4W User Manual

How to change throttle mode
Step 1. Keep pressing the red " " button and turn on the remote controller, the remote controller is
undersignal connection status (Pic. 1);
Step 2. Keep pressing the RTH button " " for 3 seconds to choose the throttle control mode (Pic. 2).
The throttle control mode will change according to each press. The mode number is shown on
the LCD screen. The throttle control mode is set at mode 2 by default.
①
Attention: To change the stick mode of the remote controller, please make sure that
!
Install the Mobile Phone Holder
1. Pull out the mobile phone holder upwards completely (Pic. 1);
2. Tilt the holder 30 degrees towards you and then you will hear a click sound (Pic. 2);
3. Rotate and fix the support board in place (Pic. 3);
4. Adjust the mobile phone holder upward or downward according to the size of your mobile phone
(Pic. 4).
Pic. 1
the remote controller is under signal connection status (the indicator light
keep flashing). If not, the stick mode could not be changed.
Pic. 1
Pic. 3
②
-19-
Bugs 4W User Manual
Pic. 2
Pic. 2
Pic. 4