Attach And Detach The Propellers - MJX R/C Bugs 4W User Manual

Attach and Detach the Propellers

Attach the propellers
Install propeller A and propeller B on the corresponding motor shaft and fix the rotor propellers tightly
by rotating clockwise. (A/B mark are at the bottom of the propeller.)
Detach the propellers
Take out the screws by rotating counter-clockwise and then remove the propellers.
● Please make sure that the clockwise and the counter-clockwise propellers are
!
installed on the correct motors, because the aircraft will not fly normally for wrong
propellers installation.
● Be aware of the sharp edges of the propellers. Handle with care.
● Use only the MJX approved propellers. Do not mix propeller types.
● Stand clear of the motors and DO NOT touch the propellers when they are spinning.
● Check that the propellers and motors are installed correctly and firmly before every
flight.
● Ensure that all propellers are in good condition before each flight. DO NOT use
aged, chipped, or broken propellers.
● To avoid injury, STAND CLEAR of and DO NOT touch propellers or motors when
they are spinning.
● ONLY use original MJX propellers for a better and safer flight experience.
A B
B A
A B
B A
-13-
Bugs 4W User Manual