Motorola V60 Series Manual page 40

4.1 v.60 Characteristics/Differences from Timeport
ID #
Power down phone from phone key while it is powering up. Power back up and no
DTMF keypress tones in vehicle and in the phone (when flip opened).
001
Unknown caller ID is in phone incoming call list as unknown or private but shows
002
nothing in HU calls list.
Speed dial a number from phonebook containing a variable number will keep
displaying dialing until call is ended. The 1 st call after ending call will not complete.
003
Must be ended and next call will complete.
Phone in call plug into vehicle with flip open and speaker phone soft key does not work
1 st time. SPEAKER PHONE SOFT KEY IS NOT INTENDED FOR VEHICLE USE.
004
SEE NOTE ON PAGE 10 OF VEHICLE MANUAL.
Phone in autolock, connected, unlock phone, power down, power up, HU displays
Ready for 8 seconds before Lock screen, during 8 seconds phone can be accessed from
005
HU.
Phone is disconnected and reconnected before disconnect tones(less than 3 seconds
between connections). Phone loses communication with PSE until power cycled. HU
006
Displays still 'Tel. not plugged in'.
Phonebook/Calls/Last Calls blinks 2 times quickly whenever lists are updated due to
007
incoming or outgoing calls.
If user has the same phone number stored with a different area code it will not matched
to name tag correctly. Proper number will be dialed but the first name tag entry
008
alphabetically will be displayed.
Call failed/redial – Call failed, redial?, screen will not be displayed on head unit as with
Timeport. Phone will automatically go into redial mode and head unit will display
dialing for up to 4 minutes. Call can be ended from head unit or phone at any time.
After 4 minute the phone redial mode will timeout and head unit will go back to Ready
screen.
009
Phone book quantity – Timeport has maximum of 99 entries and v.60 has possible 400
entries. The head units can only display up to 99 entries. If phone book entry location is
greater than 99 it will not be displayed or selectable on head unit but will be available
from the phone. Under this condition it would appear as if head unit and phone are not
synchronized.
010
Digits entered on head unit with phone flip open will display on phone and does not get
cleared when cleared on head unit, must be cleared on phone.
011
v.60 takes much longer to power up and down which sometimes appears that head unit
and phone are out of sync.
012
Pause dialing – pause character is entered from head unit but wait character is entered
into phone. Operation is identical to Timeport but symbol in phone is different.
013
014 DTMF tones heard in phone speaker when flip open and in an active call
911 automatically dialed from location 1 when phone locked and location 1
speed/turbo dialed.
015
Mercedes Benz Telephone Manual v4.6
v.60 Characteristics/Differences from Timeport
4.0 Troubleshooting Section
Date: 09/01/2004