Step 2: Connecting The Video Cords - Sony D-VM1 Operating Instructions (primary manual) Operating Instructions Manual

Step 2: Connecting the Video Cords

Connect this player to your TV monitor, projector, or AV amplifier (receiver) using a video cord.
Select one of the patterns A or B, according to the input jack on your TV monitor, projector, or
AV amplifier (receiver).
(yellow)
TV, projector, AV
amplifier (receiver)
AC power cord
(supplied)
to a wall outlet
A If you are connecting to a video input jack
Connect the yellow plugs of the audio/video cord (supplied) to the yellow (video) jacks. You will
enjoy standard quality images.
Yellow (Video)
Black (Audio)
Use the black plug to connect to the audio input jack (page 53).
B If you are connecting to an S VIDEO input jack
Connect the S VIDEO cord (not supplied). You will enjoy high quality images.
(yellow)
Audio/video cord
(supplied)
AC power adaptor
(supplied)
S video cord
(not supplied)
(yellow)
to VIDEO
to S VIDEO
OUT
OUT
Yellow (Video)
White (L)
Red (R)
TV, projector, AV
amplifier (receiver)
CD/DVD player
l: Signal flow
51