Step 3: Playing A Disc - Sony D-VM1 Operating Instructions (primary manual) Operating Instructions Manual

Step 3: Playing a Disc

A Make sure the power is turned off. Securely connect the monitor unit to the player,
and the headphones to the monitor unit.
You can connect the supplied headphones to the i jack on the player. By connecting
headphones to the i jacks on both the monitor unit and player, two people can listen together.
Headphones (supplied)
to i
B Slide OPEN to one side, and unhook the buckle to open the lid.
C Place the disc on the tray with the playback side facing down, and close the lid.
Press the center of the disc until it clicks. Make sure there is no space between the disc and
the disc tray.
Monitor unit (supplied)
With the playback side
facing down
to MONITOR
Fasten the buckle
until it clicks.
continued
,
21 21