Playing Discs
Resuming Playback from
the Point Where You
Stopped the Disc
Play)
When you stop the disc, the player
remembers the point where you pressed x.
As long as you do not remove the disc,
Resume Play works even if the player is
turned off.
SHIFT
1
While playing a disc, press
playback.
"Disc will restart from current point."
appears on the screen and you can restart
the disc from the point where you
stopped the disc.
If this message does not appear, Resume
Play is not available.
2
Press
.
NX
The player starts playback from the point
where you stopped the disc in Step 1.
Using the remote
(Resume
1
2
z
pressing SHIFT, press x when the player is stopped.
You can play from the beginning also by opening the
NX
buckle and fasten again.
x
• Depending on where you stopped the disc, the player
• The point where you stopped playing may be cleared
to stop
x
H
Press x.
Press H.
To play from the beginning of the disc, while
Notes
may not resume playback from exactly the same
point.
when:
– you disconnect the rechargeable battery or power
cord.
– you change the play mode.
– you change the settings on the Setup Display.
– you disconnect the AV output adaptor and connect
it again.
x
25