Step 2: Charging The Rechargeable Battery - Sony D-VM1 Operating Instructions (primary manual) Operating Instructions Manual

Inserting batteries into the remote
You can control the player using the supplied remote. Insert two size AA (R6) batteries (not
supplied) by matching the 3 and # ends on the batteries to the markings inside the compartment.
When using the remote, point it at the remote sensor on the player.
Notes
• Do not leave the remote in an extremely hot or humid place.
• Do not drop any foreign object into the remote casing, particularly when replacing the batteries.
• Do not expose the remote sensor to direct light from the sun or lighting apparatus. Doing so may cause a
malfunction.
• If you do not use the remote for an extended period of time, remove the batteries to avoid possible damage from
battery leakage and corrosion.

Step 2: Charging the Rechargeable Battery

Charge the supplied rechargeable battery.
18
4
to DC IN 10V
# end first.
Insert the
3
AC power adaptor
(supplied)
AC power cord
(supplied)
4
to a wall outlet