Table of Contents
Advertisement
Using the remote
AUDIO
ENTER
DISPLAY
Press AUDIO repeatedly to select the desired
audio signal.
z
You can also display the Control Menu by
pressing DISPLAY. Use X/x instead of v/V.
Notes
• While playing a Super VCD on which the audio
track 2 is not recorded, no sound will come out when
you select "2:STEREO," "2:1/L" or "2:2/R."
• For discs not in multiple audio format, you cannot
change the sound.
• While playing a DVD, the sound may change
automatically.
• Depending on the DVD, you may be able to change
the sound only on the disc's menu.
Checking the audio signal format
When you select "AUDIO," the channels
being played are displayed on the screen.
For example, in Dolby Digital format,
multiple signals ranging from monaural to
5.1 channel signals can be recorded on a
DVD. Depending on the DVD, the number of
the recorded channels may differ.
42
X/x
* "PCM," "DTS," "MPEG," or "DOLBY
DIGITAL" is displayed.
In the case of "DOLBY DIGITAL," the
channels in the playing track are displayed
by numbers as follows:
For Dolby Digital 5.1 channel:
Front component 2 +
Center component 1
**The letters in the program format display
mean the following sound component.
Current audio format*
12 ( 27 )
18 ( 34 )
C 00:09:57
1:ENGLISH
1:ENGLISH
PROGRAM FORMAT
2:FRENCH
DOLBY DIGITAL 3/2.1
Currently playing program format**
DOLBY DIGITAL 3 / 2 . 1
LFE (Low Frequency
Effect) component 1
L:
Front (left)
R:
Front (right)
C:
Center
LS:
Rear (left)
RS:
Rear (right)
S:
Rear (monaural): The rear
component of the Dolby Surround
processed signal and the Dolby
Digital signal
LFE: Low Frequency Effect signal
PLAY
DVD
L
C
R
LFE
LS
RS
Rear component 2
Advertisement
Table of Contents
