Example with XMC 2Go
Notes
The Shield2Go form factor of the Shield2Go
•
evaluation board is directly compatible with the
XMC 2Go
board
Stack the TLV493D-A1B6 3DSense Shield2Go
•
board on top of the XMC 2Go as shown in the
picture
The additional pin on the left-top side (designated
•
with NC) is left floating
Using the
XMC-for-Arduino
•
Arduino library
directly used
Steps
Open one of the examples for the TLV493D-A1B6 from File – Examples
•
and select as board XMC1100 XMC2Go
Connect the stacked boards to the PC and press the Upload button
•
Select the related COM port from Tools – Port and open the serial monitor with
•
the set baud rate (see sketch/code with Serial.begin(<BAUDRATE>);)
2018-07-17
Arduino integration, the
for the TLV493D-A1B6 can be
https://github.com/Infineon/XMC-for-Arduino
https://github.com/Infineon/TLV493D-A1B6-3DMagnetic-Sensor
Copyright © Infineon Technologies AG 2018. All rights reserved.
9