Not Possible - Infineon 3DSense Shield2Go TLV493D-A1B6 Quick Start Manual

Important Warning
Important Warning
The TLV493D-A1B6 has a maximum
•
rating of 3.5 V on any pin
Third party boards with 5 V logic, e.g.
•
the Arduino Uno, cannot be connected
to the TLV493D 3DSense Shield2Go
board directly.
Even if the power is connected to the
•
3.3 V pin, the interface lines, e.g.
SDA/SCL, will still be driven by 5 V
Please use appropriate level shifting
•
for these boards
2018-07-17 Copyright © Infineon Technologies AG 2018. All rights reserved.
Not
possible
10