Photo - Lexmark E330 Technical Instructions

Lexmark E232/330/332 Technical Instructions

Photo 39

Photo 40
Photo 41
Step 15
Test the waste hopper.
Step 12
Slide the drum axle into the drum starting
on the drive gear side. See Photo # 39.
Step 13
Install the "E" clip onto the small gear side
of the drum axle. See Photo # 40.
Step 14
Install the toner hopper locking mecha-
nism onto the waste hopper. Install the
two screws that hold the bar in place. See
Photo # 41.
7
Notes