Setting The Audio Output (Audio Setup); (Audio Setup) - Sony WALKMAN D-VE7000S Operating Instructions Manual

Setting the Audio Output
Items
Options (
DOWNMIX Use this function to create stereo (2-channel) signals from Dolby Digital sources
recorded on DVDs. This setting affects the outputs of the AUDIO jack.

DIGITAL OUT You can set the mode of the digital signals output from the OPTICAL OUT jack.
SETUP
AUDIO DRC Makes the sound clear when the volume is turned down when playing a DVD that
conforms to "Audio DRC" (Dynamic Range Control). (Thanks to the dynamic
range compression, the volume of quiet sound is maintained.) Select the level to
your convenience. This setting affects the outputs of the AUDIO jack.


: Default settings)
Select this when the connected audio component supports
DOLBY
Dolby Surround (Pro Logic).
SURROUND
NORMAL Select this when the connected audio component does not
support Dolby Surround (Pro Logic).
DOLBY
DOLBY
DIGITAL
DIGITAL

DOWNMIX
PCM
DTS DTS

PCM

48kHz/96kHz
48kHz
PCM
96kHz
STANDARD Standard setting.
WIDE Produces powerful sound. More effective with high quality
RANGE speakers.
( AUDIO SETUP)
Select this when connecting an audio
component with a built-in Dolby Digital
decoder.
Select this when connecting an audio
component without a built-in Dolby Digital
decoder.
Select this when connecting an audio
component with a built-in DTS decoder.
Select this when connecting an audio
component without a built-in DTS decoder.
Select this when the PCM signal is output at
48 kHz.
Select this when the PCM signal is output at
96 kHz.
Continued 
43