Preparing A Power Source (Rechargeable Battery); Charging Through The Speaker Cradle - Sony WALKMAN D-VE7000S Operating Instructions Manual

Preparing a Power Source
(Rechargeable Battery)
Charge the built-in rechargeable battery
before using the player for the first time, or
when the battery is depleted.
If you keep the AC power adaptor connected
to the speaker cradle, you can charge the
battery simply by mounting the player on the
speaker cradle.
Notes
• Charging is not performed during playback.
• During charging, the player and the speaker cradle
may become warm. This poses no danger.
Charging through the
speaker cradle
1
Connect the AC power adaptor to
the DC IN 12V jack of the speaker
cradle and an AC outlet.
to DC IN 12V
AC power adaptor
2
Charging time
Approximately 3 hours to charge an empty
battery up to full capacity.
Speaker cradle
Mount and dismount the player carefully.
Notes on the AC power adaptor
• Disconnect all power sources when the player is
• Use only the AC power adaptor supplied. Do not
to an AC outlet
• Do not touch the AC power adaptor with wet
• Connect the AC power adaptor to an easily
Mount the player on the speaker
cradle.
Charging starts and the
in orange first, and then remains lit.
Screen side
When the battery is completely charged,
the lamp turns red.
Note
not to be used for a long time.
use any other AC power adaptor. It may cause a
malfunction.
hands.
accessible AC outlet. Should you notice an
abnormality in the AC power adaptor, disconnect it
from the AC outlet immediately.
lamp flashes
lamp
Speaker side
Polarity of the plug
19