Error Displays - Sony WALKMAN D-VE7000S Operating Instructions Manual

Connection
Symptom
No picture appears on the TV
connected.
The picture from the connected
component does not appear on the
screen of this player.
The picture from the connected
component appears irregularly.
No sound or distorted sound is
heard from the audio component
connected.

Error displays

Display
HI DC IN
LOW BATTERY
Video codec not supported
Wrong Region
56
Cause and/or corrective action
 Set the LINE SELECT switch to OUT.
 Color system setting is not correct for the TV. Set [COLOR
SYSTEM] according to the color system of the TV (  page
42).
 Check the input/output setting on the TV.
 Set the LINE SELECT switch to IN.
 Press ENT to switch the color system of the player to that of
the external signal (  page 50).
 Set [DOWNMIX] or [DIGITAL OUT SETUP] according to the
component connected (  page 43).
Cause and/or corrective action
 An AC power adaptor which is rated higher than the one
supplied or recommended is being used. Use only the supplied
AC power adaptor.
 The rechargeable battery is used up completely. Charge the
battery (  page 19).
 The video file is not supported by the player (The video file is
not a DivX video file, even if the file has the extension ".avi" or
".divx").
 The region code of the DVD currently in the player does not
conform to the player (  page 9).
 The operation cannot be done with the disc.