Video Setup
Underlined items are the default settings.
TV Type
4:3
– 4:3 screen TV.
– Select your TV type.
16:9
– Wide-screen TV, or a TV with a wide mode function.
4:3 Video Out
Full
– Displays a 4:3 screen picture in 16:9 aspect ratio.
– Select the display configuration for a 4:3
screen picture on a 16:9 wide screen TV.
Normal
– Displays a 4:3 screen picture in 4:3 aspect ratio with black bands on the sides. Select
this if your TV does not have a 4:3 screen mode.
DVD Aspect Ratio
Letter Box
– Displays a wide picture with black bands on the top and
– Select the display configuration for a 16:9
bottom.
DVD picture on a 4:3 screen TV (selectable
when “TV Type” is set to “4:3”).
Pan & Scan
Note that the aspect ratio is fixed on some
– Displays a full-height picture on the entire screen, with
discs. For example, a 4:3 letterbox picture
trimmed sides.
may appear even when “Pan & Scan” is
selected.
YCbCr / RGBPC (HDMI)
Y, Cb, Cr
– Select this when connecting to an HDMI device.
– Select the type of output from the HDMI
OUT jack.
RGB (16-235)
– Select this when connecting to a device with an HDCP-compliant DVI jack.
RGB (0-255)
– Select this when connecting to an RGB (0-255) device.
24p Output
On
– Sends 1920 × 1080p/24 Hz video signals when playing Film-based materials on BD-
– For connection to a 1080/24p-compatible TV
ROMs (720p/24 Hz or 1080p/24 Hz). Select this when the connection applies.
using the HDMI OUT jack.
Off
– Select this for any other connection.
Note
“TV Type” and “DVD Aspect Ratio” can be set when video output resolution is 480i/480p.
continued
45
Audio Setup
Underlined items are the default settings. Since many factors
affect the type of audio output, see also “About the audio output
signals” on page 48.
Dolby Digital
Dolby Digital
– Select this when connecting to a device with a built-in Dolby Digital decoder.
– Select the audio signals output when playing
Dolby Digital discs. This setting affects the
Downmix PCM
output from the DIGITAL OUT (COAXIAL
– Converts to output Linear PCM signals. Select this when connecting to a device
or OPTICAL) jack.
without a built-in Dolby Digital decoder.
DTS
DTS
– Select this when connecting to a device with a built-in DTS decoder.
– Select the audio signals output when playing
DTS discs. This setting affects the output
Downmix PCM
from the DIGITAL OUT (COAXIAL or
– Converts to output Linear PCM signals. Select this when connecting to a device
OPTICAL) jack.
without a built-in DTS decoder.
DTS Downmix
Stereo
– Downmixes multi-channel audio signals for two channel stereo.
– Select the type of 2-channel signals when
down-mixed from multi-channel DTS
Lt/Rt
sources (effective for audio connections
– Allows you to hear surround sound when the connected device has a built-in Dolby
when “DTS” is set to “Downmix PCM”).
Pro Logic decoder.
Audio (HDMI)
Auto
– Normally, select this. Outputs audio signals according to the status of the connected
– Select the output method from the HDMI
HDMI device.
OUT jack.
PCM
– Converts all audio signals to Linear PCM.
continued
47
1-11