Table of Contents
Advertisement
www.weg.net
Counters showing the following icons on the "COUNTERS" menu is active:
cnt1 :This icon appears with "COUNTER1" counter;
cnt2 :This icon appears with "COUNTER2" counter;
run :This icon appears with "RUN HOUR" counter;
on :This icon appears with "ON HOUR" counter;
int :This icon appears with "POWER INTERRUPTION COUNTER" counter.
CAUTION!
Counters are displayed as 8 digits. All counters are reset at 99 999 999 and then start over from zero.
Only "COUNTER1", "COUNTER2" and "RUN HOUR" counters can be assigned values or reset.
Use the procedure for assigning default values to assign values to counters.
See: 3.3.1 Save Procedure.
When the energy meters are displayed instantaneously, last measured parameters (such as voltage, current, active power
values etc.) are continued to display under the energy meter value as well.
3.5 SETTINGS MENU (SETTINGS)
MMW03-M22CH setings are made in the SETTINGS menu. Table 3-3 shows the SETTINGS menu tree.
18 | Energy Analyzer - MMW03-M22CH
COUNTER
(Counter Menu)
Tabela 3.2: Counters Menu Structure
Figura 3.5: COUNTER2 Menu
COUNTER 1
(Counter 1)
COUNTER 2
(Counter 2)
RUN HOUR
(Run Hour Countersı)
ON HOUR
(On Hour Countersı)
POWER INT. COUNTER
(Power Interrupt Counter)
Advertisement
Table of Contents
