Installation - SAMCOM ExCam XF P1367 User Manual

Attention!
Prior to installation, take external sources of heat or cold into account!
The temperature ranges prescribed for storage, transportation, and
operating must be adhered to!
Attention!
Observe the warnings given on the type plate:
The use in hazardous areas with regard to temperature and dust layers is
defined in the respective national regulations.
When installing the ExCam, adhere to the requirements of the EN/IEC
60079-14.
4

Installation

For erecting and operating the camera, the relevant national regulations, as well as the
generally accepted rules of technology shall prevail. Before mounting the camera, thor-
oughly check it for any transport damage, especially on the housing and cable. Installa-
tion, electrical connection and the first start must only be carried out by qualified special-
ists.
Work preparation:
Attention!
Prepare your work carefully and in accordance with the relevant
regulations.
Attention!
Depending on classification of hazard areas, a work approval has to
be obtained.
When you open the pressure-resistant enclosure under voltage, it is
absolutely necessary to prevent potentially explosive atmosphere!
To ensure the best image quality delivered by the network camera, plan the installation
site carefully (consider light conditions, object distance or size, angle and minimum object
distance to the focus).
"WARNING – DO NOT OPEN IN HAZARD AREAS"
"WARNING – DO NOT OPEN WHILE ENERGIZED"
Doc.-ID: 190314-PT08BA-ES-ExCam XF-P1367_EN_rev.00.docx, Page 7 of 32