Table of Contents
Advertisement
5.3.6
Tests prior to switching on the voltage
Attention!
Prior to starting the device, perform all tests as indicated by the na-
tional regulations. Furthermore, check the correct function and instal-
lation of the device in accordance with this User Manual and other ap-
plicable regulations.
Attention!
Incorrect installation and operation of the camera may lead to a loss of
warranty!
Attention!
Do not switch on the camera at temperatures below 0°C!
6
Working in the camera housing
The customer may open the housing only if it is absolutely necessary. Only exchanging
the SD memory card or a hardware reset are reasons for this.
Open the pressure-resistant housing extremely carefully! After having finished the work,
securely re-close it and ensure that the explosion protection is restored! To do this, you
need to proceed step by step, as described in the instructions below.
6.1
Work preparation:
Attention!
Prepare your work carefully and in accordance with the relevant
regulations.
Attention!
Depending on classification of hazard areas, it is imperative to obtain
a work approval first!
If you adjust the camera yourself or open the pressure-resistant en-
closure (Ex-d) under voltage, it is absolutely imperative to prevent po-
tentially explosive atmosphere!
Doc.-ID: 190314-PT08BA-ES-ExCam XF-P1367_EN_rev.00.docx, Page 19 of 32
Advertisement
Table of Contents
