Flywheel; Vibration Damper; Engine Suspension - BMW N62 Series Service Training

New Generation N62 Engine

- Flywheel

The flywheel is made from laminated plate. The starter rim and
increment wheel (for recording the engine speed and crankshaft
positioning detection) are riveted directly on the drive disc while
warm.
The flywheel diameter is 320 mm.

- Vibration damper

The vibration damper is a torsional vibration absorber in an axial
non-interacting design.

- Engine suspension

The engine suspension is provided by means of two hydraulic
damping engine mounts.
The engine mounts are located on the front axle carrier. The
structure and function of the engine mounts are the same as
those of the E38/M62.
© BMW AG, Service Training
Course Contents/Background Material
Chapter 3 P.78