Sony WF-1000XM3 Help Manual page 43

Wireless noise canceling stereo headset

Hide thumbs Also See for WF-1000XM3:

Table of Contents

You will hear voice guidance "Bluetooth connected" from the left unit (or from the right unit when you are wearing

only the right unit).

Hint

The above procedure is an example. For more details, refer to the operating instructions supplied with the iPhone.

Note

When connecting, [WF-1000XM3], [LE_WF-1000XM3], or both may be displayed on the connecting device.

When both or [WF-1000XM3] is displayed, select [WF-1000XM3]; when [LE_WF-1000XM3] is displayed, select [LE_WF-

1000XM3].

If the last-connected Bluetooth device is placed near the headset, the headset may connect automatically to the device by simply

turning on the headset. In that case, deactivate the Bluetooth function on the device or turn off the power.

If you cannot connect your iPhone to the headset, delete the headset pairing information on your iPhone and perform the pairing

again. As for the operations on your iPhone, refer to the operating instructions supplied with the iPhone.

Table of Contents