Each Setting And Adjustment; Necessary Items To Be Noted; Special Key Function Specifications; Updating Of The Firmware (Main Microcomputer) - Pioneer X-EM11V Service Manual

5

8. EACH SETTING AND ADJUSTMENT

8.1 NECESSARY ITEMS TO BE NOTED

After replacing the MAIN Assy, be sure to check the version of the firmware, and if it is not the latest one, update to the latest
version.

8.2 SPECIAL KEY FUNCTION SPECIFICATIONS

Function Model
APS setting
Version display (CPU)
Version display (DVD)
CPU RESET
DEMO

8.3 UPDATING OF THE FIRMWARE (MAIN MICROCOMPUTER)

Procedures
1 Decompress the supplied file (with the extension .RAR). The decompressed file will have the extension .BIN.
2 Copy the .BIN file mentioned in Step 1 to a USB memory device.
3 Press the INPUT button of the unit to set it to USB mode.
4 Plug the USB memory device into the USB connector of the unit.
"MCU UPGRADE" is displayed on the TV.
Wait for 20 seconds or Press ENTER on the <O>.
"MCU UP" is displayed on the LCD.
The unit will automatically shut itself off after upgrading is completed.
Note: Be sure not to turn the unit off or unplug the USB memory device while upgrading is in progress.
How to Confirm the Version of the Firmware
1 In Standby mode, press and hold np (SKIP +) button for 3 seconds, then press and hold om (SKIP -) button.
2 "EM**VV**" is displayed on the LCD.
(Example: EM21VV42)
5
6
In standby mode, press and hold f (PLAY/PAUSE) button.
DVD
In Standby mode, press and hold np (SKIP +) button for 3 seconds, then press and hold
DVD
om (SKIP -) button. [Display in LCD]
DVD When "NO DISC " is displayed, press "8" key 4 times (input "8888"). [Display in monitor out]
In standby mode, press and hold u STANDBY/ON button for about 8 seconds.
DVD
In standby mode, press and hold g (STOP) button.
DVD
6
7
Operation
X-EM21V
7
8
A
B
C
D
E
F
25
8