Additional Information; Design Files; Software; Hardware Change Log - Texas Instruments SimpleLink CC3100MOD User Manual

www.ti.com
5

Additional Information

5.1

Design Files

All design files including schematics, layout, Bill of Materials (BOM), Gerber files, and documentation are
made available in a zip folder that can be downloaded from www.ti.com/tool/CC3100MODBOOST.
5.2

Software

All design files, including TI-TXT object-code firmware images, software example projects, and
documentation are available from the CC3100MOD device's product page.
The Software Development Kit (SDK) for use with the CC3100MOD BoosterPack is available from
http://www.ti.com/tool/cc3100sdk.
5.3

Hardware Change Log

5.4

Known Limitations

1. The serial flash on the module can be programmed mainly through the UART of the
CC3100MODBOOST board.
SWRU396B – December 2014 – Revised May 2018
Submit Documentation Feedback
Table 10. Hardware Change Log
PCB Revision
Rev. 1
CC3100MOD SimpleLink™ Wi-Fi® Network Processor Module BoosterPack
Copyright © 2014–2018, Texas Instruments Incorporated
Additional Information
Description
Initial Release
Hardware
17