Acs800 Minimum Required Parameter Settings For Profinet - ABB ACS355 Series Quick Start Up Manual

ACS800 Minimum required parameter settings for PROFINET

The minimum required parameter settings based on factory default settings.
Parameter Description
98.02 COMM.
MODULE LINK
98.07 COMM
PROFILE
51.01 FBA A ype
51.02 Protocol/Profile
51.04 IP Configuration
51.05 ... IP address
51.08
51.09 Subnet CDR
51.27 FBA PAR
REFRESH
10.01 EXT 1
STRT/STP/DIR
11.03 EXT REF1
SELECT
16.04 FAULT RESET
SEL
(11.05) EXT REF1
MAXIMUM
Setting
FIELDBUS
ABB DRIVES
Ethernet
PNIO ABB Pro (11)
Static (0)
192.xxx.xx.xx or any
other required IP
address.
24
REFRESH
COMM.CW
COMM.REF
COMM.CW
[Scale max]
Comment
Activates fieldbus module
Communication profile ABB drives
Filedbus type
Communication profile ABB drives
-
-
24 For subnet mask 255.255.255.0
Updates fieldbus settings (groups 51 to 55)
Fieldbus interface as source for start and
stop
Fieldbus interface as source for speed
reference
Fieldbus interface as source for fault reset
Max speed/frequency scaling value (used in
function block/visualization input
SPEED_REF_MAX). Must be less or equal
to drive parameter max speed/frequency.