Carel kVent Manual page 14

Unit setup Control type
2 EBM fan
0
1
2
3
3
3 Ziehl Abegg fan
0
1
2
3
3
All other I/O not described in the table above, are optional.
According to the table is possible to understand the unit setup in the following example.
kVent – rel 3.1 – 22/06/2018
Mandatory I/O
for supply)
No regulation
Supply air pressure (AI13), Exhaust air
VAV
pressure (AI14)
Supply air pressure (AI13), Exhaust air
CAV
pressure (AI14)
Follow supply (only for return)
Hepa filter compensation (only
for supply)
No regulation
Supply air pressure (AI13), Exhaust air
VAV
pressure (AI14)
Supply air pressure (AI13), Exhaust air
CAV
pressure (AI14)
Follow supply (only for return)
Hepa filter compensation (only
for supply)
Not available I/O
Modulating supply fan (AO1), Modulating exhaust fan (AO2)
Modulating supply fan (AO1), Modulating exhaust fan (AO2)
Modulating supply fan (AO1), Modulating exhaust fan (AO2)
Modulating supply fan (AO1), Modulating exhaust fan (AO2)
Modulating supply fan (AO1), Modulating exhaust fan (AO2)
Modulating supply fan (AO1), Modulating exhaust fan (AO2)
Modulating supply fan (AO1), Modulating exhaust fan (AO2)
Modulating supply fan (AO1), Modulating exhaust fan (AO2)
14