Rear Panel - Sony JumboTron Operating Instructions Manual

Rear panel

AC IN
SIGNAL OUT COM SENSOR
1 2 3 4
1 SIGNAL OUT connector (D-sub 15-pin)
Connect a JumboTron display unit to be adjusted.
2 COM connector (D-sub 9-pin)
Connect a computer to display the data for
demonstration.
3 SENSOR connector (Half-pitch 20-pin)
Connect a unit alignment sensor (not supplied).
4 AC IN connector
Connect the AC power supply of 100–240 V.
Use the supplied AC power cord which fits the AC
outlet in your area.
11