Table of Contents
Advertisement
13.
Digital output
The method of setting of digital output is explained.
1. Flash out (strobe pulse)
This camera can output flash pulse when trigger mode or electric shutter mode,
(A) When output flash pulse at the same time as exposure time and without delay.
(1) LineSelector → "Line2"
(2) LineSource → "ExposureAcitve" ・・・ (*1)
(3) LineInverter → False / True ・・・ (*1)
(B) When adjust delay or duration of flash pulse
(1) LineSelector → "Line2"
(2) LineSource → "Timer1Active" ・・・ (*1)
(3) LineInverter → False / True ・・・ (*1)
(4) TimerSelector → "Timer1"
(5) TimerDuration → 0 to 2,000,000 ・・・ (*2)
(6) TimerDelay → 0 to 2,000,000
(7) TimerTriggerSource → "ExposureStart"
(*1) Following table shows polarity of flash out signal
LineInverter
Output flash signal
False
True
(*2) When set to 0 → duration of flash pulse is equal to actual exposure time
2. VD out
This camera can output camera VD. It is used when synchronizing other camera.
(1) LineSelector → "Line2"
(2) LineSource → "VD"
Following table shows polarity of VD signal
VD signal
Exposure
VD out
Exposure
Flash out
Exposure
Flash out
37
Advertisement
Table of Contents
