Battery Status; Automatic Shut-Off - VTech Kidizoom Camera Pix User Manual

Note: If a memory card is being used, data stored in the internal
memory cannot be seen in the camera unless the memory card
is removed. to prevent accidental data loss, make sure you have
backed up all important data from your memory card before using.
TO BEGIN USING KIDIzOOM
PIX™
• Press the ON/OFF ButtON
• If it is the first time that you are turning on the Kidizoom
you will be asked to set your own language, the date and the time before
starting. Press the up
the desired language and press the OK ButtON
settING. next, set the date and time. Press the up
CursOr ButtONs to select the correct day, month, year, hour, and
minute. Press the left
the previous or the next setting item. Finally, press the OK ButtON
to confirm the setting. If you wish to change the language, date and time
later, please go to settings.
• After the initial setting is done, when Kidizoom
on, it will go directly into Camera mode and you can start taking photos.
• Press the HOme ButtON
enter other activities.
• Press the ON/OFF ButtON

BATTERY STATUS

when the screen shows a low Battery icon
a fresh set of batteries as soon as possible.
when the screen shows a Batteries exhausted icon
not work properly. new batteries should be inserted before further use.

AUTOMATIC SHUT-OFF

To preserve battery life, Kidizoom
turn off after 3 minutes without operation in Camera, movies modes or
Animation maker. In the other modes, the auto-off time is 2 minutes.
8
to turn on the camera.
or Down CursOr ButtONs to select
or right CursOr ButtONs to jump to
to go to the main menu where you can
again to turn the unit off.
Camera Pix
®
CAMERA
®
Camera Pix™,
®
to confirm the
or Down
Camera Pix™ is turned
®
, we recommend installing
, the unit will
will automatically
TM