Battery Notice; Memory Card Installation - VTech Kidizoom Camera Pix User Manual

BATTERY NOTICE

• Use new alkaline batteries for maximum performance.
• Use only batteries of the same or equivalent type as recommended.
• Do not mix different types of batteries: alkaline, standard (carbon-zinc)
or rechargeable (ni-Cd, ni-Mh), or new and used batteries.
• Do not use damaged batteries.
• Insert batteries with the correct polarity.
• Do not short-circuit the battery terminals.
• Remove exhausted batteries from the toy.
• Remove batteries during long periods of non-use.
• Do not dispose of batteries in fire.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the toy before charging
(if removable).
• Rechargeable batteries are only to be charged under adult supervision.

MEMORY CARD INSTALLATION

• Kidizoom Camera Pix™ supports the below memory cards for
®
memory expansion.
microsd
microsdhC
microsd Logo and microsdhC Logo are trademarks of sd-3C,LCC.
• Make sure the camera is turned
OFF.
• Locate the memory card slot at the
bottom of the camera.
• Pull up the rubber cover.
• Insert the memory card (not included)
as illustrated. once the memory card
is detected and can be used, the
default memory will be set as the memory card automatically.
• To remove the memory card from the slot, make sure the camera is turned
OFF and push the card once and it will eject.
7