VTech Kidizoom Camera Pix User Manual page 18

C. Factory reset
Factory reset will erase the contents stored in the internal memory
and reset all system settings to factory default, e.g. file index, photo
resolution, game level.
Following these three commands you will be asked to confirm your
choice. Follow the instructions on the screen to confirm the action.
Note: If the memory card is being used, data stored in the internal
memory cannot be seen in the camera unless the microsd card is
removed. when the internal memory of the Kidizoom Camera Pix
® tm
is getting full, or when the file indexes are used up, you should back up
all the files from the camera's internal memory to your computer. Then,
delete the files in the camera's internal memory to free up space.
• Photo Resolution
For the best picture quality, please select 2.0 megapixel. To save
memory, choose the 0.3 megapixel option. This option will allow you to
save more pictures.
• Indoor Light Frequency
The default value is set according to the a.C. frequency of your region,
please leave your camera set to the default value unless you are traveling.
• Date & Time
This menu shows the current date and time. If you want to change the
setting, press the OK ButtON . after entering the Set Date & Time
menu, press the up or Down CursOr ButtONs to change
the settings, and press the left or right CursOr ButtONs
to jump to the previous or next item. once you are done, press the OK
ButtON
to exit this menu.
• ABC (language)
This menu shows the current language selection. If you want to change
the language setting, press the up or Down CursOr ButtONs
to select your desired language and press the OK ButtON
to confirm
your selection.
18