Battery Status; Automatic Shut-Off; Connecting To A Computer - VTech Kidizoom Touch User Manual

Table of Contents

Advertisement

Battery status

When the screen shows a Low Battery icon
a fresh set of batteries as soon as possible. The unit will not work
properly when it shows the Batteries Exhausted icon
should be inserted before further use.

autoMatIc shut-oFF

To preserve battery life, Kidizoom
after 3 minutes without operation in the Camera or Movies modes. In
other modes, the auto-off time is 2 minutes. While using Music Slide
Show, the auto-off time is 15 minutes.

connectIng to a coMPuter

You can connect Kidizoom
included USB cable. Once connected, you can transfer files between
the camera and computer. Please follow the below steps to make the
connection.
• Turn the camera OFF before connecting to a computer.
• Pull up the rubber cover of the USB port at the bottom of your camera.
• Insert the USB cable (small end) into the USB port on the camera.
• Insert the larger end of the USB cable into a USB port on the computer.
A USB port is usually marked with this symbol
• Two removable drives called VTech 1450 and VT SYSTEM will
appear. VTech 1450 is for storage of your data, VT SYSTEM is for
storage of system data and cannot be accessed. If there is a memory
card in the camera, the removable drive will show the content on the
memory card only.
The toy is only to be connected to Class II equipment bearing the following
symbol
NOTES:
• Once the camera is connected to your computer, do not insert or remove
the memory card and do not disconnect the camera while files are
uploading or downloading. After you have finished, remove the camera
145003 manual_Running change .indd 9
®
Touch to a PC or Mac computer using the
.
, we recommend installing
®
Touch will automatically turn off
.
. New batteries
9
08/09/2013 16:09:06

Advertisement

Table of Contents
loading

Table of Contents