Table of Contents
Advertisement
the next setting item. Finally, press the OK ButtOn
setting. If you wish to change the language, date and time later, please go
to settings.
• After the initial setting is complete and the stormtrooper
is turned on, it will go directly into Camera mode and you can start taking
photos.
• Press the HOMe ButtOn
enter other activities.
• Press the On/OFF ButtOn
BatterY status
When the screen shows a low Battery icon
a fresh set of batteries as soon as possible.
When the screen shows a Batteries exhausted icon
work properly. New batteries should be inserted before further use.
autOMatiC sHut-OFF
To preserve battery life, the stormtrooper
automatically turn off after 3 minutes without operation in Camera or
Movies modes. In other modes, the auto-off time is 2 minutes.
COnneCtinG tO a COMPuter
You can connect the stormtrooper
computer by using a micro USB cable. Once connected, you can transfer
files between the camera and your computer. Please follow the steps
below to make the connection.
• Turn the camera OFF before connecting to a computer.
• Pull up the rubber cover of the USB port on the bottom of your camera.
• Insert the small end of the USB cable into the USB port on the camera.
• Insert the larger end of the USB cable into a USB port on the computer.
A USB port is usually marked with this symbol:
• Two removable drives called "Vtech 5074" and "Vt sYsteM" will
appear. "Vtech 5074" is for storage of your data, "Vt sYsteM" is for
storage of system data and cannot be accessed.
note: If there is a memory card in the camera, the removable drive will
show the content in the memory card only.
to go to the Main Menu where you can
again to turn the unit off.
, we recommend installing
TM
digital Camera to a PC or Mac
TM
to confirm the
digital Camera
TM
, the unit will not
digital Camera will
9
Advertisement
Table of Contents
