Table of Contents
Advertisement
Hose Seal (x2)
632.73
1603.104
Shower hose 1.25m (metal) - chrome
1703.078
Slide Bar 680 mm - chrome
1703.127
Slide Bar 680 mm - Brushed Stainless Steel
1703.195
taper Block
Mounting Pack - components identified 'A'
1703.269
1703.271
end cap
1703.272
Soap Dish
1703.273
Slide Bar Support - white
1703.274
Slide Bar Support - chrome
1703.275
clamp Bracket - white
1703.276
clamp Bracket - chrome
1703.297
nectar Showerhead - chrome
1703.298
nectar Showerhead - white
1703.299
nectar adjustable Showerhead - chrome
1703.300
nectar adjustable Showerhead - white
1703.297
1703.298
Flow regulator (12 l/min - red) -
1641.059
If your shower has no flow control,
you may find operation of the
shower on high pressure systems
too forceful. Fitting a flow regulator in
the showerhead will reduce this.
Spare parTS
1703.195
1703.297
1703.298
1703.272
acceSSorIeS
1703.275
1703.276
632.73
1603.104
checkvalve - 1688.282
to comply with UK water regulations
you must make provision to prevent the
backflow of waste water through the
shower.
a hose retaining ring will allow compliance
but may restrict full use of the hose.
However, if your mixer shower is already
fitted with single inlet checkvalves then
fitting the extra showerhead checkvalve
will allow compliance without the need for
the hose retaining ring.
11
a
1703.271
1703.273
1703.274
1703.275
1703.276
1703.078
1703.127
a
Advertisement
Table of Contents
