JC MACHINERY & TOOLS INC.
The machine has a memory function parameters, namely when you use the
●
welder next time, the welder will automatically use the last set of parameters
without having to re-set parameters.
VII. Positioning the welder
Pressure Lift lever (30) to lift machine, move it to welding position (the edge of upper membrane should
keep in the same alignment with Drive silica roller (1) and the edge of Guide wheel (13), as shown in
figure 4.
(13)
Upper film
上膜
Down film
The edge of upper film
___________________________________________________________________
上膜边缘
www.jc-tool.com
Figure 4
info@jc-tool.com
Quality We Trust
(30)
(1)