Advertisement
JC MACHINERY & TOOLS INC.
Quality We Trust
VI. Using Condition
1. The distance between hot air nozzle and ground should be shown as figure 5（We have
adjusted the distance）.
2. The distance between hot air nozzle and Drive roller should be shown as figure 6（We
have adjusted the distance）. You can adjust Hot air nozzle adjusting screw figure 7 if the
distance is not right.
35-42mm
1mm
Figure 5
图 6
Figure 6
(Nozzle adjustment screw)
(Nozzle and driving rubber wheel of interval)
Figure 4
___________________________________________________________________
www.jc-tool.com
info@jc-tool.com
Advertisement
