Air Volume - JC MACHINERY & TOOLS JC-GM-PLUS User Manual

JC MACHINERY & TOOLS INC.
Current temp.
Setting temp.
Current temp.
Setting temp.
Current temp.
Setting temp.
VI. Welding parameters setting
1. Welding temperature
Using bottoms Temperature setting knob+
on the panel to set the required temperature. You can set the temperature according to
the welding materials and the ambient temperature. LCD display will show the set
temperature and the current actual temperature.
2. Welding speed:
Using bottoms Speed setting knob+
the panel to set the required speed according to the welding temperature. LCD display will
show the set speed and the current actual speed.

3. Air volume:

Using the button on the panel
clockwise and reduce the air volume counterclockwise. When the ambient temperature is
too low and the current temperature can not reach the set temperature, the air volume can
be reduced appropriately.
___________________________________________________________________
www.jc-tool.com
Figure 1
Figure 2
Figure 3
and Speed setting knob-
to set the air volume, increase the air volume
info@jc-tool.com
Quality We Trust
Current speed
Setting speed
Current speed
Setting speed
Current speed
Setting speed
and Temperature setting knob-
on