Uconnect Voice Command; Voice Command Operation - Jeep WRANGLER 2017 User Manual

UCONNECT VOICE
COMMAND

Voice Command Operation

The Uconnect Voice Command system allows
you to control your AM, FM radio, satellite
radio, disc player, HDD, Uconnect Phone, a
memo recorder, and supported portable me-
dia devices.
While In:
Main Menu
Radio Mode
• When you push the "Voice Command"
button located on the radio face-
plate or steering wheel, you will hear a
beep. The beep is your signal to give a
command. If you do not say a command
within a few seconds, the system will pres-
ent you with a list of options. If you ever
want to interrupt the system while it lists
options, push the "Voice Command" but-
ton , listen for the BEEP, and say
your command.
"Radio AM" (to switch to the AM radio mode)
"Radio FM" (to switch to the FM radio mode)
"Satellite Radio" (to switch to the Satellite radio mode)
"Disc" (to switch to the disc mode)
"USB" (to switch to the USB mode)
"Bluetooth Streaming" (to switch to the Bluetooth Streaming mode)
"Memo" (to switch to the memo recorder)
"System Setup" (to switch to system setup)
"Frequency" (to change the frequency)
"Next Station" (to select the next station)
"Previous Station" (to select the previous station)
"Radio Menu" (to switch to the radio menu)
"Main Menu" (to switch to the main menu)
• Start a dialogue by pushing the "Voice
Command" button
beep. The beep is your signal to give a
command. Below are a list of voice com-
mands for each of the different modes:
Voice Command Example:
, you will hear a
255