Rear Door Removal (Four-Door Models) - Jeep WRANGLER 2017 User Manual

Rear Door Removal (Four-Door Models)

WARNING!
Do not drive your vehicle on public roads
with the doors removed as you will lose the
protection they can provide. This proce-
dure is furnished for use during off-road
operation only.
Door Removal Warning Label
NOTE:
Hinge pin can break if overtightened during
door reinstall (Max Torque: 10 N·m / 7.5 ft· lb).
20
1. Roll down the glass window to prevent any
damage.
2. Remove the hinge pin screws from the
upper and lower outside hinges (using a
#T50 Torx head driver).
NOTE:
The hinge pin screws and nuts can be
stowed in the rear cargo tray located un-
der the rear load floor.
Hinge Pin Screw
3. Slide the front seat(s) fully forward.
4. Remove the trim access door from the
bottom of the B-pillar.
Trim Access Door
5. Unplug the wiring harness connector.
NOTE:
Squeeze the tab on the base of the con-
nector. This will unlock the connector
tab, allowing the harness to be discon-
nected.